Tri Axle Tag Trailer

10,500mm Long including drawbar x 2,500mm Wide

Gross: 26,800kg (Subject to Truck GCM, Tow Coupling & Drivers License Class).
Tare: 7,400kg + or – 3%.
Capacity: 19,400kg.

Fully fabricated with 5mm checker plate, 200 x 8mm CNC cut coamings.
Fully integrated drawbar and beavertail with ramps.

Fabricated with UB 310 46.2kg .
89mm x 89mm x 3mm SHS cross members.
Fabricated with universal beam floor support.

1,450mm including coupling.
One piece drawbar with bolt on coupling.
Coupling height: 600mm + or – 50mm.

5mm checker plate with chain slots (crows feet) every metre against coamings.
8,000mm Long excluding beavertail.
1,050mm floor Height using 255/R70 22.5 Tyres.

1,000mm Long with 5mm checker plate with swing down legs.
Beavertail is additional to floor length.
Open centre rear well.
Swing down stabilising legs for additional support when ramps in use.

2,500mm x 760mm with grip cleats.
Hydraulic rear cylinders powered by 12V or 24V power pack with 2 x batteries.
Charging by 175A Anderson Plug.
Controls located passenger side rear.
Battery Isolator switch fitted.
Double acting valve bank with float on down mode.
Burst protection valves fitted to ramp cylinders.

8mm machine cut, raised 10mm above floor level.
Rope rail mounted under comings.
Horizontal tie downs mounted between floor & coamings every metre.

Fixed 300mm high made out of heavy duty 100mm x 50mm x 3mm RHS.

Rear access via step between ramps & handles.
Front access either side of trailer.

K-Hitch 20″, suits 10 stud 285/335 PCD drum brake, parallel bearing & auto slack adjusters.
Enclosed cam tubes, grease hubs.

Jato/Tag A Long 9 leaf under slung 1,220mm spread mechanical suspension, 90mm wide spring packs.
Fully cast suspension with Mullins rubber bushes.
Widest & most stable mechanical suspension on the market today.

Holland DB-1385 drawbar eye.
Vertical load rating 6,800Kg.

2 Speed wind down heavy duty landing leg rated to 28,000Kg static capacity.

Mudflaps fitted to the rear to tyre group.

Air Brake Corporation (ABC) to current ADR38/05.
WABCO multivolt EBS fitted.

To current ADR 13 requirements using Hella Mutivolt LED lights.
3 in 1 Heavy duty with 8 to 28 volt range and 0.8 power consumption.
All wiring in E-Max electrical loom and connections using Deutsch double “O” ring sealed plugs.
DG and IP68 rated.

Tubeless 255/70R 22.5 tyres (13 supplied).

10 stud 285 / 335 PCD, 8.25 x 22.5″ steel wheels (13 supplied).

Single wind up spare tyre carrier.

16mm Chains fitted for tow hitch.

All statutory signs, including rear marker signs.

All welds to be carried out in the optimum position.
All vertical welds to be up hand.
No porous welds.
No weld grind back ( thinning weld runs ).
No heavy grind marks that will show when painted.
No undercut or rolling welds.

All surfaces to be painted will be cleaned of all weld spatter.
Temporary weld tack’s sanded smooth.
Abrasive blast.
Paint thickness to manufactures specification.
All touch up’s of paintwork to blend.
Paint work to be of consistent thickness with high gloss finish and no runs.
Chassis: 2 pack (One colour).
Ramps: Galvanised.

All service points to be serviceable and accessible.
All brake, hydraulic, air and electric lines to be of correct working length
and be bracketed, spiral wrapped, clamped and tied to prevent chaffing / pinching.
All brakes to be adjusted, lubricated and tested.
All hydraulics to be tested and checked for leaks.
Laser Wheel Alignment.
Comprehensive Owners Manual Supplied.
Risk Assessment Supplied.